(In Stock) Neo65 Keyboard Kit

£122.50

Sold out

Pickup currently unavailable at ProtoTypist Keyboards

Kit 1

ProtoTypist Keyboards

Pickup currently unavailable

ProtoTypist Keyboards
1 Alpha Court
Bradford BD5 8FH
United Kingdom

+447843244701

In Stock items ship same day if ordered before 2pm (weekdays) or next working day if ordered after 2pm or on weekends/holidays.

Kits: Kit 1

In Stock items ship same day if ordered before 2pm (weekdays) or next working day if ordered after 2pm or on weekends/holidays.

Product Availability

Kit 1 Sold Out
Kit 2 Sold Out
Kit 3 Sold Out
Kit 4 Sold Out

IN STOCK - Ships within 3 working days, all sales final.

In Stock Kits Avaialble:

Kit	Case Colour	Weight	PCB	Plate
Kit 1	Green	Mirror Dusk	Tri-mode Hotswap	POM
Kit 2	Black	Mirror Chroma	Tri-mode Hotswap	FR4
Kit 3	Green	Brass	Tri-mode Hotswap	FR4
Kit 4	Purple	Mirror Dusk	Tri-mode Hotswap	POM

New colours added for this round:

Baby Blue, Grey, Champagne and Chestnut for the case
Mirror Black and Mirror Silver for the weight

Neo65 Design

Unibody Case

Our design code is based on minimalism. The Neo 65 features an ultra-slim side bezel that blends seamlessly with any desk setup, regardless of the theme.

Neat Side Profile

We chose an inward-sloping edge to complement the minimal design on the front. This also makes it easier to pick up the keyboard.

Brass Weight with Orbit Engraved Logo

The name Neo not only refers to the designer but also represents Near Earth Objects.

We opted for the orbit as the logo for the Neo series to symbolize the interconnection and alternation of our products.

Dual Mounting System

Support both PCB gasket mount and gummy O-ring mount (not compatible with plateless configurations)
With our specially designed gaskets, the PCB and plate can be securely held in place, even if the case is flipped upside down
Finely-tuned sound profile - no hollowness nor case ping without the use of any foam
Reserved groove for the O-ring at the blocker - no need to forcefully bend the O-ring anymore, so the assembly experience can be more efficient and enjoyable
O-rings with different stiffness levels are available to provide varying typing feedback

Selective PCBs

We selected the 1.6mm PCB without flex cut to achieve a louder and fuller sound profile
All PCBs are QMK-based, VIA supported
Three PCB options:
- Tri-mode Hotswap
  - Support wired, Bluetooth, and 2.4GHz connection
  - Support both ANSI and ISO layout
  - NKRO
  - Polling rate: 1000Hz in wired and 2.4Ghz mode; 125Hz in BT mode
- Solder
  - Support both ANSI and ISO layout
  - USB-C connection only
  - NKRO
  - Polling rate: 1000Hz

Layout for tri-mode and solder PCB

Wired ANSI Hotswap
- Per-key RGB
- ANSI layout
- USB-C connection only
- NKRO
- Polling rate: 1000Hz

Layout for wired PCB

Plate Feel:

Hard ———————————————> Soft:
Carbon Fibre -> Aluminium -> FR4 -> POM -> PC

Clack ———————————————> Thock:
Carbon Fibre -> Aluminium -> FR4 -> POM -> PC

We recommend to take one hard and one soft plate additional so you can fine tune your experience better. So for example Alu in the kit and POM additional or PC and FR4.

Specifications:

Typing angle：8 degree
Front height：17mm
Size：310.35mm x 107.8mm
Weight：
Before build：0.97kg
After build：1.32KG

Includes:

Case
Including one pre-installed external weight
Two 2200 mAh batteries will be installed inside of the bottom case for orders with Tri-mode PCBs
Orders with wired PCBs will receive fillers for the battery compartments
PCB Kit
PCB of your choice
1x PE sheet
1x PCB Foam
Standoffs
Tri-mode PCB comes with a 2.4Ghz dongle
Plate of Your Choice
Poron Case Foam
Daughterboard - installed
Silicone Gaskets
O-ring (50 duro) x 1
Rubber feet in grey and black
Weight screws in silver and black
Daughterboard FPC cable

Free Gifts (Not covered by warranty):

Keyboard carrying case
1x Hex screwdriver
1x Philip screwdriver
1x Keycap & Switch puller
1 set of 65% clip-in NeoStab
Coiled USB-C cable

Key Notes:

Please note that PVD doesn’t equal to mirror-polished. PVD usually refers to glossy surfaces like the weight on Spring, but it is only a coating technique that applies colour, similar to anodization or spray-coating.
Tri-Mode PCB means Bluetooth, 2,4GHz and USB-C connection possible. These boards will come with a battery included. All Tri-Mode PCBs support Hotswap.
ISO is supported with a multilayout PCB that uses a East/West facing sockets.
Single plateless solder builds are sadly not possible at this moment. You can purchase additional Solder PCBs and build it plateless if you want.

Disclaimers

Kindly note that the images are of 3D renders and are for illustration purposes only. The final colours may differ slightly.

Keyboards are shown for demonstrative purposes only and are not included with the purchase of these keycaps.

As this is an In Stock item please do not add items from group buys to this order as it will delay your orders shipping till everything is available.

Disclaimers

Kindly note that images may be of 3D renders and are for illustration purposes only. The final colours may differ slightly under different lighting.

Only the products detailed in the description are included. Other products are shown for demonstrative purposes only and are not included. Please check Keyset kitting images carefully for included keys. Please check Keyboard layout options carefully to ensure it meets your requirements.

As this is an In Stock item please do not add items from Group Buys or Pre-Orders to this order as it will delay your orders shipping till all items are available.

Customer Service

We are here to help - drop Jae an email at any time to jae@prototypist.net

Carbon Neutral

Prototypist is 100% Carbon Neutral for all products and shipping.

Other customers also bought...

Add your custom CSS in the block settings to override page styles

(In Stock) Neo65 Keyboard Kit

Product Availability

Disclaimers

Other customers also bought...

Let customers speak for us