(In Stock) Neo65 Keyboard Kit May Batch 24

IN STOCK - Ships within 3 working days, all sales final.

Kits Available

Kit	Case Colour	Weight	PCB	Plate
Kit 1	Black	Mirror Dusk	Tri-Mode Hotswap	POM
Kit 2	Navy	Mirror Dusk	Tri-Mode Hotswap	PC
Kit 3	White	Brass	Tri-Mode Hotswap	ALU
Kit 4	Purple	Mirror Dusk	Tri-Mode Hotswap	FR4
Kit 5	Milky White	Copper	Wired Hotswap	POM
Kit 6	Green	Brass	Tri-Mode Hotswap	FR4
Kit 7	Navy	Mirror Chroma	Tri-Mode Hotswap	PC
Kit 8	Milky White	Copper	Wired Hotswap	ALU
Kit 9	Black	Mirror Dusk	Tri-Mode Hotswap	POM
Kit 10	White	Brass	Tri-Mode Hotswap	ALU
Kit 11	Green	Brass	Tri-Mode Hotswap	FR4
Kit 12	Yellow	Mirror Golden	Tri-Mode Hotswap	ALU

Neo65 Design

Unibody Case

Our design code is based on minimalism. The Neo 65 features an ultra-slim side bezel that blends seamlessly with any desk setup, regardless of the theme.

Neat Side Profile

We chose an inward-sloping edge to complement the minimal design on the front. This also makes it easier to pick up the keyboard.

Brass Weight with Orbit Engraved Logo

The name Neo not only refers to the designer but also represents Near Earth Objects.

We opted for the orbit as the logo for the Neo series to symbolize the interconnection and alternation of our products.

Dual Mounting System

Support both PCB gasket mount and gummy O-ring mount (not compatible with plateless configurations)
With our specially designed gaskets, the PCB and plate can be securely held in place, even if the case is flipped upside down
Finely-tuned sound profile - no hollowness nor case ping without the use of any foam
Reserved groove for the O-ring at the blocker - no need to forcefully bend the O-ring anymore, so the assembly experience can be more efficient and enjoyable
O-rings with different stiffness levels are available to provide varying typing feedback

Selective PCBs

We selected the 1.6mm PCB without flex cut to achieve a louder and fuller sound profile
All PCBs are QMK-based, VIA supported
Three PCB options:
- Tri-mode Hotswap
  - Support wired, Bluetooth, and 2.4GHz connection
  - Support both ANSI and ISO layout
  - NKRO
  - Polling rate: 1000Hz in wired and 2.4Ghz mode; 125Hz in BT mode
- Solder
  - Support both ANSI and ISO layout
  - USB-C connection only
  - NKRO
  - Polling rate: 1000Hz

Layout for tri-mode and solder PCB

Wired ANSI Hotswap
- Per-key RGB
- ANSI layout
- USB-C connection only
- NKRO
- Polling rate: 1000Hz

Layout for wired PCB

Plate Feel:

Hard ———————————————> Soft:
Carbon Fibre -> Aluminium -> FR4 -> POM -> PC

Clack ———————————————> Thock:
Carbon Fibre -> Aluminium -> FR4 -> POM -> PC

We recommend to take one hard and one soft plate additional so you can fine tune your experience better. So for example Alu in the kit and POM additional or PC and FR4.

Specifications:

Typing angle：8 degree
Front height：17mm
Size：310.35mm x 107.8mm
Weight：
Before build：0.97kg
After build：1.32KG

Includes:

Case
Including one pre-installed external weight
Two 2200 mAh batteries will be installed inside of the bottom case for orders with Tri-mode PCBs
Orders with wired PCBs will receive fillers for the battery compartments
PCB Kit
PCB of your choice
1x PE sheet
1x PCB Foam
Standoffs
Tri-mode PCB comes with a 2.4Ghz dongle
Plate of Your Choice
Poron Case Foam
Daughterboard - installed
Silicone Gaskets
O-ring (50 duro) x 1
Rubber feet in grey and black
Weight screws in silver and black
Daughterboard FPC cable

Free Gifts (Not covered by warranty):

Keyboard carrying case
1x Hex screwdriver
1x Philip screwdriver
1x Keycap & Switch puller
1 set of 65% clip-in NeoStab
Coiled USB-C cable

Key Notes:

Please note that PVD doesn’t equal to mirror-polished. PVD usually refers to glossy surfaces like the weight on Spring, but it is only a coating technique that applies colour, similar to anodization or spray-coating.
Tri-Mode PCB means Bluetooth, 2,4GHz and USB-C connection possible. These boards will come with a battery included. All Tri-Mode PCBs support Hotswap.
ISO is supported with a multilayout PCB that uses a East/West facing sockets.
Single plateless solder builds are sadly not possible at this moment. You can purchase additional Solder PCBs and build it plateless if you want.

Disclaimers

Kindly note that the images are of 3D renders and are for illustration purposes only. The final colours may differ slightly.

As this is an In Stock item please do not add items from group buys to this order as it will delay your orders shipping till everything is available.

(In Stock) Neo65 Keyboard Kit May Batch 24

You may also like