(Group Buy) Jris75 Glitter Spray-Coated Version Keyboard Kit
Closing Date: February 20th 2024
Expected Shipping time: Q2 2024
JRIS75 Glitter Spray Coated Version available in three colours with a choice of four weights and a non-flex cut Hotswap PCB and a PC Plate
Specification:
- Typing angle: 7°
- Front height: 21mm
- Material: Full CNC 6063 aluminium
- Dimension: 325*142*39mm
- PCB GASKETS structure
- QMK/VIA Supported (wired)
- Support PCB stabilizers
What's the Configuration:
- Glitter Spray-coated Case: Milky White/ Lilac/ Pink
-
Weight: Brass /Silver PVD/Black PVD/Gold PVD
- PCB: Wired Non-Flex Cut Multi Layout Hotswap PCB (1.2mm, No Per-key RGB, support QMK and VIA )
- Plate: PC Plate
What's in the Package:
- 1x Full CNC Aluminum Case
- 2x External Weight
- 1x Brass internal weight
- 1 x Non-Flex Cut Hotswap PCB
-
1x PC Plate
-
1x Type-C Daughterboard
-
1x IXPE Foam
-
1x Poron Plate Foam
-
1x Poron Case Foam
-
1x Masking paper for PCB
-
1x JST Cable
-
1 Set Anti-Shock Silicone Pad
-
1 Set of Footpad
-
1 Set of PCB stabilizers O-ring
- 26x Gasket Silicone columns
-
Gift(will not send make-up or replacements)
-
1x Customized Carrying Case
-
1x Customized Type-C Cable
-
1x Silicone pad of battery compartment
-
1x Customized PVD Artisan keycaps
-
1x Aluminium Alloy Screwdriver with 2 replaceable bits
-
1 x 2 in 1 Switch puller and Keycap puller
Shipping Time and GB Agreements (PLEASE READ):
These products are set to be shipped out in Q2 2024 but please check our updates for the latest information.
Please note that this is a Group Buy. There can be delays and set backs. The timeline is only an estimate. By adding this item to your cart and purchasing you agree that you understand everything above. You will be charged immediately for this item. There are no refunds or cancellations on these orders. Please do not purchase this item with other group buys. Only the items specified in each product picture are included with that particular product.
- Each kit comes with fragile labels. Please check the appearance thoroughly before building. If you see any noticeable flaws/scratches on the external surfaces, please take a photo and contact us immediately. We’ll not be responsible for any flaws/scratches found after building.
- Due to the nature of the PVD coat, there may be minor, unavoidable dust points/micro scratches on the mirror finish of the PVD weight. The small dust points/micro scratches are only visible at just the right angle of the lighting.
- Chroma and Gradient PVD Mirror Stainless steel weight has random nature. Each weight may have some slight differences.
- CNC marks and imperfections inside the keyboard case or dents on the subject are not visible when the keyboard is fully built. These are normal and within our quality acceptance.
- On all other surfaces and edges, blemishes under 2mm are approved.
- The bottom of the Solid Aluminium Wrist Rest is defined as a B-level surface because the bottom side is the hanger side during the anodized process. The QC standard for B-level cover: blemishes under 1cm are approved on the surfaces and edges. Three or fewer fine trachoma, dust spots, etc., are within our quality acceptance (The diameter is under0.5mm). Color uniformity is a normal phenomenon around the process hole, but it is guaranteed that it will not be visible after installation.
- Other than the case itself, all parts with cosmetic imperfections will not be replaced unless the function is damaged for usage.
- Warranty only applicable for the first owner who purchased on our website or at our collaborative shops, with proof of purchase such as order number and confirmation.
- Our warranty covers the PCB for one year of use or if dead on arrival without any modification.
- Broken parts due to any human error will void your warranty. Including below list but not only
- Mill-maxing PCB
- Tape modding PCB
- Hotswap Sockets that are pushed out of the PCB solder pads
- Did not follow the steps to flash PCB and caused no function
- Gifts will not ship out replacements or issue a partial refund